Welcome to MilkyWay@home

Posts by KIDH

1) Message boards : Number crunching : Problems with Modified Fit v1.28 (Message 59952)
Posted 22 Sep 2013 by KIDH
Post:
Hey,

please post here: Separation Modified Fit v1.28 Release, so Jake Weiss knows, that you have a problem!

regards
KIDH
2) Message boards : News : Separation Modified Fit v1.28 Release (Message 59931)
Posted 19 Sep 2013 by KIDH
Post:
Thank you KIDH. I'm sorry this fix didn't help. Hopefully I will roll out another fix soon.

Thank you again,

Jake W


Until the other GPU WUs work, it's no problem, Jake. :)

I will test your next fix.


BTW:
Keep this good support alive, it's the best of all BOINC projects,were I participate!

regards
KIDH
3) Message boards : News : Separation Modified Fit v1.28 Release (Message 59922)
Posted 18 Sep 2013 by KIDH
Post:
...Separation Modified Fit is releasing v1.28...


Hey Jake,

will give it a try and let you know if it works!


Edit:
again, all WUs failed (WinXP SP3 x86, BOINC 7.0.64, Radeon 4850 [Catalyst 12.1 last with OpenCL for WinXP])

(unknown error) - exit code -1073741819 (0xc0000005)

...

Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x77C0554A read attempt to address 0x00000008


http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313360
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313359
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313358
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313357
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313356
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313355
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313352
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313350
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313327
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313326
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313317
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=567313315


regards
KIDH
4) Message boards : News : N-Body (Message 59921)
Posted 18 Sep 2013 by KIDH
Post:
Hey Jake,

thx for the info that sience/work is goin on! :o)

regards
KIDH
5) Message boards : Number crunching : Computation errors (Message 59851)
Posted 9 Sep 2013 by KIDH
Post:
As Jake said: "Please post about them in this thread." (http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=3347)

:-)

regards
KIDH
6) Message boards : News : New Separation Modified Fit Runs Started (Message 59803)
Posted 4 Sep 2013 by KIDH
Post:
OK, thx for the info, Jake.

regards
KIDH
7) Message boards : Number crunching : Computation errors (Message 59794)
Posted 3 Sep 2013 by KIDH
Post:
I'm getting all sorts of computation errors on "de_modfit_18_3s_126testwrap_2_13727846..." Is there a "fix" for this or do I just ignore and keep on crunching?

There is no problem with de_separation_**_DR_******.

System:
Dell E521
AMD Athlon 64 X2 Dual Core 5600+
nVidia Geforce GT 640 1 Gig GDDR 5
4 Gigs RAM
Windows XP Pro (SP3)

Thank You


Are you overclocking or anything like that? You could also try a machine restart but first do a full stop and let it stay off for 2 to 3 minutes, this will clear any onboard caches that could be causing any problems. The other thing is you could go into your preferences and turn off the modified fit units and just crunch the others.


Just take a look at this thread: http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=3347

Everything should be fine with his computer, it's a problem with the app or the WUs, mostly seen on WinXP.

regards
KIDH
8) Message boards : News : New Separation Modified Fit Runs Started (Message 59793)
Posted 3 Sep 2013 by KIDH
Post:
OK, I deactivated Modified Fit for now...

regards
KIDH
9) Message boards : News : New Separation Modified Fit Runs Started (Message 59791)
Posted 3 Sep 2013 by KIDH
Post:
Hey...I'm back and it's still the same :-(

I've got some of them, all failed.

Using WinXP SP3, BOINC 7.0.64, Radeon 4850, Catalyst 12.1 (last with OpenCL for WinXP)...


regards
KIDH
10) Message boards : News : New Separation Modified Fit Runs Started (Message 59753)
Posted 29 Aug 2013 by KIDH
Post:
I've got some of them, all failed.

Using WinXP SP3, BOINC 7.0.64, Radeon 4850, Catalyst 12.1 (last with OpenCL for WinXP).

I will not have the time to do further testing, cause I am away until monday.

regards
KIDH
11) Message boards : News : New Separation Modified Fit Runs Started (Message 59750)
Posted 29 Aug 2013 by KIDH
Post:
Sorry Jake, still fails :-/

-> http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554879636
-> http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=3342&postid=59749

regards
KIDH
12) Message boards : News : Separation Modified Fit v1.26 Release (Message 59749)
Posted 29 Aug 2013 by KIDH
Post:
Sorry, I have to tell you, it's still the same. :-/ I paused SETI to take a look at the MW WUs...

http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874683
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874666
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874665
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874664
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874663
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874662
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874661
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874659
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874657
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874656
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874653
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554874634


Edit:

OK....maybe there are still old WUs on the server!? Is: modfit_15_3s, should be: modfit_18_3s!?


Edit2:

Neyt try: this time it was modfit_18_3s, but still fails:
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554879636

regards
KIDH
13) Message boards : News : Separation Modified Fit v1.26 Release (Message 59747)
Posted 29 Aug 2013 by KIDH
Post:
Thx for your answer, Sunny129!

Yes, i saw it after creating the post.

No new WUs until now, SETI@Home is working actually. I will a take a look to BOINC in about three hours again. But I think it will work, if it's working on other clients. :)

regards
KIDH
14) Message boards : News : Separation Modified Fit v1.26 Release (Message 59743)
Posted 29 Aug 2013 by KIDH
Post:
Here, too, all these WUs failed (WinXP SP3 x86, BOINC 7.0.64, Radeon 4850).

http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699207
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699206
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699203
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699202
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699198
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699194
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699182
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699177
http://milkyway.cs.rpi.edu/milkyway/result.php?resultid=554699175

regards
KIDH
15) Message boards : News : post scheduling issues here (Message 58777)
Posted 12 Jun 2013 by KIDH
Post:
@Travis:

My HD 4850 (WinXP/Cat. 12.1) is still working after your changes...everything's fine here. Just want to let you know.

Best wishes
16) Message boards : News : scheduler update (Message 58713)
Posted 11 Jun 2013 by KIDH
Post:
Thanks Travis!

As reported (-> http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=3264&postid=58712) my Radeon HD 4850 (WinXP[x86]/Catalyst 12.1) has milkyway work again since ~18:00 UTC.

Best wishes
17) Message boards : News : added applications for ati only GPUs (Message 58712)
Posted 11 Jun 2013 by KIDH
Post:
Great...it works again for 1 1/4 hour! :)

Thanks and best wishes
18) Message boards : News : added applications for ati only GPUs (Message 58707)
Posted 11 Jun 2013 by KIDH
Post:
Here it works fine since the change to 1.02 ati14.
Greetings

WinXP/Cat. 12.1 as well?

I have an ATI Radeon HD 2600 Pro on one machine...

Radeons are supported from HD 38x0 and up:

http://milkyway.cs.rpi.edu/milkyway/forum_thread.php?id=2457
19) Message boards : News : added applications for ati only GPUs (Message 58681)
Posted 11 Jun 2013 by KIDH
Post:
Indeed the application changed from 0.82 to 1.02, but it still takes the "ati14" application (which doesn't work) and not the "opencl_amd_ati" version (which worked until last week) to compute the WUs. :(

I run a Radeon 4850 on WinXP(x86) with Catalyst 12.1 (last /w OpenCL support for WinXP).

Hope you can make it work again...after Folding@Home deprecated the support of Radeons below 5000 Series I switched my GPU to Milkyway and SETI. So far these two projects remain the only two reasonable ones for me and my R4850. Would be nice if this will not change too soon, so the GPU doesn't sit around with nothing to do.


Best wishes




©2020 Astroinformatics Group