Welcome to MilkyWay@home

GPU Requirements [OLD]

Message boards : Number crunching : GPU Requirements [OLD]
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · 9 · 10 . . . 18 · Next

AuthorMessage
Profile kashi

Send message
Joined: 30 Dec 07
Posts: 311
Credit: 149,490,184
RAC: 0
Message 42205 - Posted: 17 Sep 2010, 0:04:18 UTC

Well I don't know about the drivers for games but the ATI OpenCL seems poor to me. Doesn't work on the 2nd core of a HD 5970, it's their top product and it's still not supported yet after a few different versions of the drivers and SDK software.

I was going to give the PrimeGrid PPSieve ATI/OpenCL test version a go but no point if it only works on one core.
ID: 42205 · Rating: 0 · rate: Rate + / Rate - Report as offensive
closedmeteor

Send message
Joined: 5 Sep 10
Posts: 2
Credit: 11,342,836
RAC: 0
Message 42208 - Posted: 17 Sep 2010, 12:04:20 UTC

I have a Ati 5700 series (Juniper) and it doesn't support ? double precision math's? How come? And what's the solution? My 4800 series went down yesterday so I had to change. Any Ideas? Greetz. Meteor
ID: 42208 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile [AF>EDLS] Polynesia
Avatar

Send message
Joined: 5 Apr 09
Posts: 71
Credit: 6,120,786
RAC: 0
Message 42211 - Posted: 17 Sep 2010, 14:19:22 UTC

to us when calculating for gtx 4xx????
Team Alliance francophone, boinc: 7.0.18

GA-P55-UD5, i7 860, Win 7 64 bits, 8g DDR3, GTX 470
ID: 42211 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile The Gas Giant
Avatar

Send message
Joined: 24 Dec 07
Posts: 1947
Credit: 240,884,648
RAC: 0
Message 42222 - Posted: 17 Sep 2010, 21:33:37 UTC - in response to Message 42208.  

I have a Ati 5700 series (Juniper) and it doesn't support ? double precision math's? How come? And what's the solution? My 4800 series went down yesterday so I had to change. Any Ideas? Greetz. Meteor

Use it at Collatz...
ID: 42222 · Rating: 0 · rate: Rate + / Rate - Report as offensive
John Clark

Send message
Joined: 4 Oct 08
Posts: 1734
Credit: 64,228,409
RAC: 0
Message 42223 - Posted: 17 Sep 2010, 22:40:05 UTC

Or DNETC
Go away, I was asleep


ID: 42223 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile The Gas Giant
Avatar

Send message
Joined: 24 Dec 07
Posts: 1947
Credit: 240,884,648
RAC: 0
Message 42224 - Posted: 17 Sep 2010, 23:37:00 UTC - in response to Message 42223.  

Or DNETC

When it's back up ;)
ID: 42224 · Rating: 0 · rate: Rate + / Rate - Report as offensive
John Clark

Send message
Joined: 4 Oct 08
Posts: 1734
Credit: 64,228,409
RAC: 0
Message 42230 - Posted: 18 Sep 2010, 7:56:13 UTC

Very true.

Server software upgrades and other issues. Looks like no DNETC this week end or early next week.
Go away, I was asleep


ID: 42230 · Rating: 0 · rate: Rate + / Rate - Report as offensive
ToxicTBag

Send message
Joined: 15 Mar 10
Posts: 3
Credit: 10,212,430
RAC: 0
Message 42244 - Posted: 19 Sep 2010, 16:26:09 UTC

Thanks for that list of compatable gpu's, i am running stock milkyway app cannot seem to see is there anything else i can be doing with milkyway and a gtx470 or should i just use stock app.I will have to shop around for another gpu. Would appreciate any advice...Thank You
ID: 42244 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile uBronan
Avatar

Send message
Joined: 9 Feb 09
Posts: 166
Credit: 27,520,813
RAC: 0
Message 42298 - Posted: 22 Sep 2010, 3:42:30 UTC
Last modified: 22 Sep 2010, 3:46:05 UTC

lol lets not get onto the rumours about the new series 6xxx i would seriously not expect anything more then say 7 to 20% gain if they get released.( anything above this will be nice bonus)

I know for a fact that all manufactors do not give the full potential ever, since we want our pricy cards to run longer then the warranty says ;)

I have seen some test with cpu's from DEC which where simply destroyed by going to their limits, so they will allways stay well below that risk.

Nevertheless here we see an overclocked GTX480 doing about 110 seconds over a unit, while a normal clocked AMd 5870 takes about 85 seconds..

So even though its not bad for a nvidia you must consider that any 5870 does that cooler, cheaper, more silent and last but not least needs less power todo this then those nvidia cards

On Collatz we see the same the GTX 480 OC can show in the top list but has a huge list of AMD cards above them.
To be exact a 5870 does one unit in 5 to 6 minutes and a GTX480 OC needs 6,6 to 8 minutes for the same unit.

So i can safely say nvidia made a huge improvement on the processing side on these projects but still is not able to beat a simple 5870 at all
Its new, its relative fast... my new bicycle
ID: 42298 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Rich

Send message
Joined: 19 Feb 10
Posts: 5
Credit: 107,898,627
RAC: 1,173
Message 42355 - Posted: 25 Sep 2010, 2:10:32 UTC

How to deal with MilkyWay@home server diagnostics:
"Result de_16_3s_2_835115_1279816531_0 is no longer usable"
"Result de_13_3x_2_1254273_128284363_0 is no longer usable" ?

Since January, 2010, I've processed almost 42 million on Milkyway@home, using two ATI 4870s running on an ASUS M4A79 Deluxe motherboard.
In Late August I converted from Vista64 to 64-bit Win7. I then started noticing the above diagnostics. I'm using the latest ATI and BOINC download software.
The message seems to be telling me that my GPUs are malfunctioning. However, Collatz Conjecture continues to process normally using the GPUs.
Question 2: Do we need a GPU diagnostic/validation utility?

Best Regards,
Rich
ID: 42355 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Cliff Harding
Avatar

Send message
Joined: 2 Jul 09
Posts: 27
Credit: 253,069,838
RAC: 682
Message 42405 - Posted: 27 Sep 2010, 17:25:02 UTC

I have a very unique card EVGA GTX275 w/ integrated GTS250. This is a card that has two separate physical double precision capable processors on the same card. Normally the GTS250 (GPU1) will not support double precision if on a card by itself. But in this instance because it is intregrated with the GTX275 (GPU0) it is. You may want to add this card to your list for those who have this type of card but have not designated the GTS250 to crunch GPU WUs.

Normally, I only crunch SETI, but I was doing a test by downloading some MW tasks for timing purposes. I noticed that all of the downloaded tasks were GPUs and when they started crunching is when I discovered that both GPUs were crunching on MW; instead of one on MW and the other on SETI.
ID: 42405 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Cruncher Pete

Send message
Joined: 30 Sep 07
Posts: 17
Credit: 269,654,203
RAC: 0
Message 42570 - Posted: 5 Oct 2010, 6:55:21 UTC

I am wondering what is wrong since there has been no announcement of any change. I have been using ATI 5870 and 5890 cards with no problems, crunching with GPU only. Suddenly all my cache ran dry and I am not getting any new work, yet the Server status indicate there is plenty of work.
ID: 42570 · Rating: 0 · rate: Rate + / Rate - Report as offensive
will

Send message
Joined: 11 Jan 10
Posts: 2
Credit: 2,116,243
RAC: 0
Message 42571 - Posted: 5 Oct 2010, 7:32:01 UTC - in response to Message 42570.  

Yeah, my 5850's not getting any work either.

ID: 42571 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Michael Milan

Send message
Joined: 4 Jan 09
Posts: 1
Credit: 460,112
RAC: 0
Message 42575 - Posted: 5 Oct 2010, 8:28:53 UTC

It seems to be not just ATI cards. My NVIDIA card isn't getting work either.
ID: 42575 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile NullCoding*
Avatar

Send message
Joined: 23 Sep 10
Posts: 24
Credit: 58,711,243
RAC: 0
Message 42616 - Posted: 6 Oct 2010, 4:01:12 UTC

Funny, my NVIDIA card is recognized by BOINC and MW and my client keeps requesting work for it with no error messages. For reference, my GPU is a notebook card (GeForce GT 300M) that does not support DP and only has 256MB anyway.

It works for PrimeGrid and supposedly for Collatz, although Collatz gives computation errors. Einstein won't run because of insufficient memory...

I'm looking into a Quadro 600 (brand new as of, like, yesterday) for my home desktop...Not only do I want to crunch and help more, but I'm sick of games made past 2004 crashing CONSTANTLY.

That said...wonder if I can somehow make my ATi RADEON X800 SE crunch...something.
ID: 42616 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile Dan Holtz
Avatar

Send message
Joined: 27 Sep 10
Posts: 12
Credit: 36,554,546
RAC: 0
Message 42800 - Posted: 12 Oct 2010, 23:50:34 UTC

Riddle me this?
I have a ASUS G73JH with a ATI HD5870 card that BOINC reads as a 5700 series card.
ATI GPU 0: ATI Radeon HD5700 series (Juniper) (CAL version 1.4.515, 1024MB, 1120 GFLOPS peak)

MW gives me the
Milkyway@home Message from server: No work sent
Milkyway@home Message from server: An ATI GPU supporting double precision math is required
Milkyway@home Message from server: Your computer has no NVIDIA GPU

Running Catalyst Ver. 2009.1217.1632.29627 and after I tried to update Catalyst to the most current version I locked so I am stuck with the version I have.
Downloaded the 64 bit .23 mW apps for 64 bit W7 and copied them after stopping (completely) BOINC. When run I produced WU in 2-4 seconds that were all errors. This happened to around 10 WU then I stopped it and retried the installation with the same results on another 10 WU's. deleted all and am just using the CPU at the moment.
Any ideas?
ID: 42800 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Profile KWSN imcrazynow
Avatar

Send message
Joined: 22 Nov 08
Posts: 136
Credit: 319,414,799
RAC: 0
Message 42801 - Posted: 13 Oct 2010, 0:38:09 UTC

Anybody else getting this message. I just attached this host to DNETC and now I see this.
"10/12/2010 7:23:06 PM Milkyway@home Message from server: No work sent
10/12/2010 7:23:06 PM Milkyway@home Message from server: Your app_info.xml file doesn't have a version of MilkyWay@Home N-Body Simulation.
"
Mo idea what's going on here. Please help.

4870 GPU
4870 GPU
ID: 42801 · Rating: 0 · rate: Rate + / Rate - Report as offensive
John

Send message
Joined: 17 Oct 09
Posts: 3
Credit: 1,938,062
RAC: 0
Message 42875 - Posted: 15 Oct 2010, 22:11:30 UTC

When will nvidia cards be suported by this project.
I have been unable to run since my upgrade from a 275 to Dual 470's sli

Thanks
ID: 42875 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Gerald_F. Carroll

Send message
Joined: 26 Sep 09
Posts: 3
Credit: 49,575
RAC: 0
Message 42927 - Posted: 18 Oct 2010, 8:34:18 UTC

I get a message now that i cannot get more work units from Milkyway as my system is not supported. i run a MAC, power PC G4 1.6 Ghz and 1 MB memory. The graphics card is a Nvida GEOFORCE2 MX

This started a few days ago. Does this mean i am out of luck with future work units?

I want to know so i can remove Milkwway and dedicate it's space to some other application.

Right now i run SETI, Einstien and World Community work units. At one time i did Rosetta but it's requirement went beyond my systems capabilities

gfcisme
ID: 42927 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Matt Arsenault
Volunteer moderator
Project developer
Project tester
Project scientist

Send message
Joined: 8 May 10
Posts: 576
Credit: 15,979,383
RAC: 0
Message 42934 - Posted: 18 Oct 2010, 14:42:18 UTC - in response to Message 42927.  

I get a message now that i cannot get more work units from Milkyway as my system is not supported. i run a MAC, power PC G4 1.6 Ghz and 1 MB memory.
This started a few days ago. Does this mean i am out of luck with future work units?


I'm going to try to get a PPC version of the N-body working this week.
ID: 42934 · Rating: 0 · rate: Rate + / Rate - Report as offensive
Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · 9 · 10 . . . 18 · Next

Message boards : Number crunching : GPU Requirements [OLD]

©2024 Astroinformatics Group