Welcome to MilkyWay@home

No new WU

Message boards : Number crunching : No new WU
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · Next

AuthorMessage
Profile Labbie
Avatar

Send message
Joined: 29 Aug 07
Posts: 327
Credit: 116,463,193
RAC: 0
Message 4053 - Posted: 13 Jul 2008, 21:15:56 UTC - in response to Message 4047.  

Haha, can't catch a break...Cosmo comes back online with work and MW runs out...


? ... I doubt your going to get any though from Cosmo, my Box's haven't been able to at least.


I have 50+ WUs that have been trying to upload to Cosmo for 3 days and 250+ sitting in pending and I can't even get to the home page. Don't know how anyone could get new WUs from there.



Calm Chaos Forum...Join Calm Chaos Now
ID: 4053 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Cappy [Team Musketeers]
Avatar

Send message
Joined: 3 Oct 07
Posts: 71
Credit: 33,212,009
RAC: 0
Message 4054 - Posted: 13 Jul 2008, 22:02:25 UTC

Results ready to send- 0
Results in progress- 54,169

ID: 4054 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
voltron
Avatar

Send message
Joined: 30 Mar 08
Posts: 50
Credit: 11,593,755
RAC: 0
Message 4055 - Posted: 13 Jul 2008, 22:09:46 UTC

I found a project with a load of WU's waiting to send with rather short due dates
(3 days) and have switched to see how their server is doing. They have a 64 bit Linux app, and it has a few bells and whistles missing (like progress indicator only every 10%). Google "superlink@technion" and take it from there.

I miss watching the progress meter, but work is work.

Voltron
ID: 4055 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4056 - Posted: 13 Jul 2008, 22:15:41 UTC - in response to Message 4053.  

Haha, can't catch a break...Cosmo comes back online with work and MW runs out...


? ... I doubt your going to get any though from Cosmo, my Box's haven't been able to at least.


I have 50+ WUs that have been trying to upload to Cosmo for 3 days and 250+ sitting in pending and I can't even get to the home page. Don't know how anyone could get new WUs from there.



I managed to get about 1500 Wu's sent back this morning to the Cosmo Project that had already been Reported before Scott turned things off again, probably have that many still trying to Upload to the Project too.

That's seems to be the mode of operation there, just turn things off until everything catches back up & then turn things back on again and wait for things to logjam again.

Why nothing really gets fixed there I don't know but the problems have kept popping up at the Project for some time now. It runs smooth for a while then all of a sudden things start to unravel.

But this problem you could see coming & was getting worse & worse & everybody tried to tell Scott about it but nothing was done until things just fell completely apart and we're in catch up mode now once again ... :)
ID: 4056 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Jayargh
Avatar

Send message
Joined: 8 Oct 07
Posts: 289
Credit: 3,690,838
RAC: 0
Message 4057 - Posted: 13 Jul 2008, 22:41:16 UTC

I am just happy that the ul/dl here stopped jamming my system and I can crunch again.....for now.
ID: 4057 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4058 - Posted: 13 Jul 2008, 23:03:24 UTC - in response to Message 4057.  
Last modified: 13 Jul 2008, 23:03:56 UTC

I am just happy that the ul/dl here stopped jamming my system and I can crunch again.....for now.


Not jamming my systems either, mainly because I'm not getting any new work ... LOL
ID: 4058 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Jayargh
Avatar

Send message
Joined: 8 Oct 07
Posts: 289
Credit: 3,690,838
RAC: 0
Message 4059 - Posted: 13 Jul 2008, 23:13:26 UTC - in response to Message 4058.  

I am just happy that the ul/dl here stopped jamming my system and I can crunch again.....for now.


Not jamming my systems either, mainly because I'm not getting any new work ... LOL



I am getting some new work ;)
ID: 4059 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4060 - Posted: 13 Jul 2008, 23:23:44 UTC - in response to Message 4059.  

I am just happy that the ul/dl here stopped jamming my system and I can crunch again.....for now.


Not jamming my systems either, mainly because I'm not getting any new work ... LOL



I am getting some new work ;)


Looks like I'm getting some too on a few Box's, I didn't check all of them but the few I did had MWay Wu's. Reisel Seive & Cosmo are doing a fine job of jamming my systems so they probably won't even notice if MWay does too.
ID: 4060 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Cappy [Team Musketeers]
Avatar

Send message
Joined: 3 Oct 07
Posts: 71
Credit: 33,212,009
RAC: 0
Message 4061 - Posted: 13 Jul 2008, 23:28:56 UTC

ah HELLOOOOOOOOOOOOOOOOOOOOOOO

any project admin's on duty????

:P :P we have no work.....

a idle cruncher is a unhappy cruncher :(

well hopefuly will have full cashes tomarro

and happy boxen :)
ID: 4061 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Nathan
Project scientist
Avatar

Send message
Joined: 4 Oct 07
Posts: 43
Credit: 53,898
RAC: 0
Message 4062 - Posted: 14 Jul 2008, 4:35:48 UTC
Last modified: 14 Jul 2008, 4:47:42 UTC

I'm not sure what's going on that you guys are saying there's no work at the moment. I have searches running and I don't think that all the WUs went out already, but I guess it's possible. I'm starting two new searches (gs_3720282 and gs_3721282) in hopes it fixes the problem.

In response to the longer WU problem, I give you WUs much longer than what you've been experiencing. I'm not quite sure how much longer, so let me know how they are performing; I don't want you crunching so slow it's disheartening now. :)

As far as a faster/better/stronger/improved server... I believe we are going to have to talk about this... the last I checked we had 16,000+ machines working for us and we may have reached our capacity with our current setup. No promises, but I will definitely bring this up at our next meeting.

Hope this addresses your concerns and the problems.
~Nate~
ID: 4062 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Labbie
Avatar

Send message
Joined: 29 Aug 07
Posts: 327
Credit: 116,463,193
RAC: 0
Message 4080 - Posted: 14 Jul 2008, 13:27:26 UTC - in response to Message 4062.  
Last modified: 14 Jul 2008, 13:32:58 UTC

I'm not sure what's going on that you guys are saying there's no work at the moment. I have searches running and I don't think that all the WUs went out already, but I guess it's possible. I'm starting two new searches (gs_3720282 and gs_3721282) in hopes it fixes the problem.

In response to the longer WU problem, I give you WUs much longer than what you've been experiencing. I'm not quite sure how much longer, so let me know how they are performing; I don't want you crunching so slow it's disheartening now. :)

As far as a faster/better/stronger/improved server... I believe we are going to have to talk about this... the last I checked we had 16,000+ machines working for us and we may have reached our capacity with our current setup. No promises, but I will definitely bring this up at our next meeting.

Hope this addresses your concerns and the problems.


Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!

My P4M 1.8Ghz has been running one for almost 4 hours now and is only 13% into it.

Think you could cut those down by about half?

My P4's are not going to make the deadlines unless it is increased.

Calm Chaos Forum...Join Calm Chaos Now
ID: 4080 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile banditwolf
Avatar

Send message
Joined: 12 Nov 07
Posts: 2425
Credit: 524,164
RAC: 0
Message 4083 - Posted: 14 Jul 2008, 13:37:31 UTC

I would say to increase the deadline to 7 or 10 days, and/or go from 20 to 10/12 wu's per core.
Doesn't expecting the unexpected make the unexpected the expected?
If it makes sense, DON'T do it.
ID: 4083 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Nathan
Project scientist
Avatar

Send message
Joined: 4 Oct 07
Posts: 43
Credit: 53,898
RAC: 0
Message 4087 - Posted: 14 Jul 2008, 14:05:47 UTC - in response to Message 4080.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!

My P4M 1.8Ghz has been running one for almost 4 hours now and is only 13% into it.

Think you could cut those down by about half?

My P4's are not going to make the deadlines unless it is increased.


Thanks for the quick feedback! I'll cut this down, I had a feeling it'd be a little overkill after I had started it.

Travis is a conference for the next couple days, so I can't change the deadlines or anything until I talk to him, as I'm not sure how to do this.

~Nate~
ID: 4087 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4090 - Posted: 14 Jul 2008, 14:31:16 UTC - in response to Message 4080.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!


You just need to Tune that Q9450 up a bit Labbie, the Q9450 I have does them under 7500 Seconds ... :) ... Of course it's running at 3.66Ghz but still your Q9450 should be able to run them faster than 17,000 Seconds.
ID: 4090 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Crunch3r
Volunteer developer
Avatar

Send message
Joined: 17 Feb 08
Posts: 363
Credit: 258,227,990
RAC: 0
Message 4094 - Posted: 14 Jul 2008, 14:40:58 UTC - in response to Message 4087.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!

My P4M 1.8Ghz has been running one for almost 4 hours now and is only 13% into it.

Think you could cut those down by about half?

My P4's are not going to make the deadlines unless it is increased.


Thanks for the quick feedback! I'll cut this down, I had a feeling it'd be a little overkill after I had started it.

Travis is a conference for the next couple days, so I can't change the deadlines or anything until I talk to him, as I'm not sure how to do this.


I like them the way they are now. IMO the only thing that needs to be adjusted is the deadline.




Join Support science! Joinc Team BOINC United now!
ID: 4094 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4097 - Posted: 14 Jul 2008, 15:14:30 UTC

Kinda like them the way they are now myself, I can run MilkyWay exclusively if I want to as long as the Wu Limit stays @ 20 ... :)
ID: 4097 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile banditwolf
Avatar

Send message
Joined: 12 Nov 07
Posts: 2425
Credit: 524,164
RAC: 0
Message 4098 - Posted: 14 Jul 2008, 15:15:27 UTC - in response to Message 4094.  


I like them the way they are now. IMO the only thing that needs to be adjusted is the deadline.



agree
Doesn't expecting the unexpected make the unexpected the expected?
If it makes sense, DON'T do it.
ID: 4098 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Labbie
Avatar

Send message
Joined: 29 Aug 07
Posts: 327
Credit: 116,463,193
RAC: 0
Message 4101 - Posted: 14 Jul 2008, 16:45:15 UTC - in response to Message 4090.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!


You just need to Tune that Q9450 up a bit Labbie, the Q9450 I have does them under 7500 Seconds ... :) ... Of course it's running at 3.66Ghz but still your Q9450 should be able to run them faster than 17,000 Seconds.


I've had it up to 3.2Ghz, but this machine is not a dedicated cruncher and the other things that it does really doesn't like it OC'd that high. I'm thinking of replacing the Gigabyte GA-P35-DS3L motherboard with the one that MSattler runs over on SETI, I don't remember the model number off the top of my head. I think the MB is really the limiting factor here. Plus, I'm running WinXP on it. That probably accounts for some of the slowness. ;)

In a couple of months I'll build a totally dedicated cruncher and try out Linux on that one.


Calm Chaos Forum...Join Calm Chaos Now
ID: 4101 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
STE\/E

Send message
Joined: 29 Aug 07
Posts: 486
Credit: 576,516,217
RAC: 36,784
Message 4104 - Posted: 14 Jul 2008, 18:58:18 UTC - in response to Message 4101.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!


You just need to Tune that Q9450 up a bit Labbie, the Q9450 I have does them under 7500 Seconds ... :) ... Of course it's running at 3.66Ghz but still your Q9450 should be able to run them faster than 17,000 Seconds.


I've had it up to 3.2Ghz, but this machine is not a dedicated cruncher and the other things that it does really doesn't like it OC'd that high. I'm thinking of replacing the Gigabyte GA-P35-DS3L motherboard with the one that MSattler runs over on SETI, I don't remember the model number off the top of my head. I think the MB is really the limiting factor here. Plus, I'm running WinXP on it. That probably accounts for some of the slowness. ;)

In a couple of months I'll build a totally dedicated cruncher and try out Linux on that one.


D'oh, Yes, of course, I forgot I was running Linux on that Box too, but then you didn't say you was running Windows either so I didn't figure the OS into the equation of how my Q9450 could run the same Wu's over Twice as fast ... :)
ID: 4104 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile Labbie
Avatar

Send message
Joined: 29 Aug 07
Posts: 327
Credit: 116,463,193
RAC: 0
Message 4105 - Posted: 14 Jul 2008, 19:33:32 UTC - in response to Message 4104.  

Lomger? I'll say. 17,000+ seconds on my Q9450 at 3.0Ghz!!!!


You just need to Tune that Q9450 up a bit Labbie, the Q9450 I have does them under 7500 Seconds ... :) ... Of course it's running at 3.66Ghz but still your Q9450 should be able to run them faster than 17,000 Seconds.


I've had it up to 3.2Ghz, but this machine is not a dedicated cruncher and the other things that it does really doesn't like it OC'd that high. I'm thinking of replacing the Gigabyte GA-P35-DS3L motherboard with the one that MSattler runs over on SETI, I don't remember the model number off the top of my head. I think the MB is really the limiting factor here. Plus, I'm running WinXP on it. That probably accounts for some of the slowness. ;)

In a couple of months I'll build a totally dedicated cruncher and try out Linux on that one.


D'oh, Yes, of course, I forgot I was running Linux on that Box too, but then you didn't say you was running Windows either so I didn't figure the OS into the equation of how my Q9450 could run the same Wu's over Twice as fast ... :)


No problem. Like you said, I didn't state the OS and probably should have. But I did remember from some previous posts of yours that you are running some flavor of Linux, so I did take that into account. ;)




Calm Chaos Forum...Join Calm Chaos Now
ID: 4105 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · Next

Message boards : Number crunching : No new WU

©2024 Astroinformatics Group