Message boards :
Number crunching :
New Benchmark Thread - times wanted for any hardware, CPU or GPU, old or new!
Message board moderation
Previous · 1 · 2 · 3 · 4 · 5 · 6 · 7 . . . 19 · Next
Author | Message |
---|---|
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
Updated table :- ************************************************************************************ Current GPU statistics ~ Average Run Time to Complete 1 MW v1.02 106.88 credit WU :- HD 7970 (GPU 1200 MHz, RAM 1550 MHz) .............. 21.3s ... tictoc (Win 7) R9 280X (GPU 1185 MHz, RAM 1600 MHz) .............. 23s ...... DutchDK R9 280X (GPU 1125 MHz, RAM 975 MHz) ................ 23.1s ... Arivald Ha'gel R9 280X (GPU 1100 MHz, RAM 1500 MHz) .............. 23.5s ... TennesseeTony HD 7970 (GPU 1200 MHz, 1550 MHz) ..................... 23.7s ... tictoc (Win 10, also a different PC) R9 280X (GPU 1100 MHz, RAM 950 MHz) ................ 24.1s ... Arivald Ha'gel HD 7950 (GPU 1188 MHz, RAM 1250 MHz) .............. 24.1s ... GLeeM HD 7970 GE (GPU 1000 MHz, RAM u/c 1375 MHz) .... 25s ...... DrPop R9 280X (GPU 1070 MHz, RAM 1600 MHz) .............. 25s ...... WES HD 7950 (GPU 1080 MHz, RAM 1250 MHz) .............. 27s ...... DR4GOON HD 7950 (GPU 1000 MHz, RAM 1250 MHz) .............. 28.1s ... GLeeM HD 7950 (GPU 1050 MHz, RAM 1250 MHz) .............. 29s ..... DR4GOON HD 7950 (GPU 925 MHz, RAM 1250 MHz) ............... 31.2s ... salvorhardin HD 7950 (GPU 900 MHz) ...................................... 33s ...... Tom* HD 7870 XT Boost (GPU 975 MHz, RAM 1500 MHz) .. 34.1s ... kozicka HD 7950 (stock) .................................................. 39.8s ... Rudy Toody HD 7950 (stock) .................................................. 42.8s ... wayliff HD 5970 (GPU 900 MHz, RAM 1200 MHz) ................ 43.7s ... superpower (dual GPU card) HD 5870 (GPU 850 MHz, RAM u/c 600 MHz) ............ 46.2s ... swiftmallard HD 5850 (GPU 850 MHz, RAM u/c 500 MHz) ............ 51s ..... Assimilator1 HD 5970 (GPU 735 MHz, RAM 1010) ...................... 52.6s ... superpower (dual GPU card) HD 5850 (stock) .................................................. 60s ..... Assimilator1 HD 4850 (stock) ................................................. 121s .... TennesseeTony GTX 980 (GPU 1417 MHz, RAM 6000 MHz) ............. 130s .... Biodoc (Linux) HD 7850 (stock - TBC) ........................................ 139.4s . usao HD 4830 (stock) ................................................. 161s .... TLS GTX 970 (GPU 1114-1253 MHz) ........................... 165s .... Orange Kid GTX 560 Ti (stock) ............................................. 252s .... zzuupp R9 m275 (stock) ................................................ 290s .... waffleironhead GTX 670 (stock) ................................................. 363s .... zzuupp GTX 690 (stock) ................................................. 394s .... S@NL - JBG (dual GPU card) GTX 750 Ti (stock) ............................................. 445s ..... TLS GTX 260 c216 (stock) ......................................... 454s ..... Assimilator1 Current CPU statistics ~ Average CPU Time to Complete 1 MW v1.0x 106.88 credit WU :- Intel i7-5820K (o/c 4.1 GHz) ............................... 2055s ... TennesseeTony Intel C2Q Q9550 (o/c 3.6 GHz) ............................ 3159s ... Assimilator1 Intel Xeon X5570 (Turboing to 3.2 GHz) ............... 3376s ... DutchDK Intel Xeon X5650 (o/c 4.1 GHz) ........................... 4130s ... DR4GOON AMD Phenom 940 (3 GHz) .................................. 4680s ... TLS Intel i7-4702MQ @2.2GHz, (HT on) ...................... 6245s ... Maxwell AMD X2 4600 (2.4 GHz) ...................................... 9780s ... TLS (links busted by this forum) Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
![]() ![]() Send message Joined: 13 Apr 15 Posts: 19 Credit: 22,543,893 RAC: 0 ![]() ![]() |
Probably, since I don't know how to adjust the clocks, it's probably whatever they are set to by default. Is there a tool/program used to see what the clocks are current set at, and to adjust them? Id be happy to install it. |
![]() Send message Joined: 8 Apr 13 Posts: 89 Credit: 517,085,245 RAC: 0 ![]() ![]() ![]() |
OK, so Tesla K20c (ECC off, 758 MHz): 37 s The early times on my machine were with default 705 MHz clock (~40 s) |
![]() ![]() Send message Joined: 13 Apr 15 Posts: 19 Credit: 22,543,893 RAC: 0 ![]() ![]() |
The Radeon HD 7990 is touting 1.9 TFlops (FP64) That's slightly better than the Titan Black. Has anyone tried this card? |
![]() Send message Joined: 31 Dec 11 Posts: 17 Credit: 3,172,528,345 RAC: 6 ![]() ![]() |
Some of the lower end 7970s and 280x's had a pretty weak power delivery system, and did not have VRM temp monitoring. This is pretty important for MilkyWay, since it pushes the VRMs harder than just about any other task you can throw at it. I am also not a fan of the Boost Bios' or any type of throttling in the BIOS, since it can make it tough to keep the card running at full speed @usao the 7990 is just two full Tahiti(7970/280x) dies on one PCB. If temps and throttling can be kept in check then it theoretically will perform the same as two 7970s or 280x's. In practice this is not always true, since many BOINC projects can be tough to run on a dual GPU card. I never ran my 7990 on MilkyWay, but with a no-throttle BIOS it was comparable to a pair of stock clocked 7970s in other tasks. |
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
Thx, but which are the lower end cards? ;)
Ref your PM, GPU clock of 1030 MHz is an overclock of 170 MHz according to its Wiki, 1200 MHz is default for the RAM. AMD std drivers have basic overclocking & speed reading tab, go to the AMD CCC, Performance, Overdrive. Enable graphics overdrive if you want to o/c further (presumably yours is factory o/c seeing as you haven't adjusted them). Oh also GPU-Z is a good info tool for grx cards, including many live sensor readings). Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
![]() ![]() Send message Joined: 13 Apr 15 Posts: 19 Credit: 22,543,893 RAC: 0 ![]() ![]() |
The 7850's were an old mining computer, which had been sitting for over a year. I just fired it up and loaded the boinc gui and it ran fine. I had forgotten how that was setup, but I found the MSI overclocking tool was loaded, which is where I got the speed details. Down side is the box keeps going into "GPU Missing" mode, over and over again. Could be the overclocking, or could be the age. It's got lots of dust on it. It's in a back corner in my garage, so not easily accessible. |
Send message Joined: 15 Feb 14 Posts: 6 Credit: 5,009,890 RAC: 0 ![]() ![]() |
So I was just re-reading the thread, slightly confused as to how to do a CPU benchmark, is it just a simple case of disabling GPU and let a WU run only on CPU. BTW usao I think messaged me, I did reply, but for those that want to find their list of tasks go here and then click the Tasks link. http://milkyway.cs.rpi.edu/milkyway/home.php |
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
So I was just re-reading the thread, slightly confused as to how to do a CPU benchmark, is it just a simple case of disabling GPU and let a WU run only on CPU. Assuming you have at least a dual core CPU, you don't need to disable GPU crunching, but you do need to enable CPU apps in the online MW preferences (on by default IIRC). Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
Send message Joined: 15 Feb 14 Posts: 6 Credit: 5,009,890 RAC: 0 ![]() ![]() |
I have a 4790k that I upgraded to a few months back, just wondered how to test it :) Still won't be anywhere near as fast as the GPU though! |
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
Yea it would be cool to have a time for your CPU :). Like I said, check in your online MW account that you have CPU work on, so 'your account' > 'preferences' > 'MW@H preferences' > 'use CPU' set to yes (if not already done). You also want 'Run only the selected applications MilkyWay@Home: yes' The rest as they are. Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
![]() Send message Joined: 11 Feb 11 Posts: 57 Credit: 69,475,644 RAC: 0 ![]() ![]() |
r9 280x @ 1180 core 1550 ram 23s |
![]() Send message Joined: 11 Feb 11 Posts: 57 Credit: 69,475,644 RAC: 0 ![]() ![]() |
sry for the double post, cannot edit the above amd xfx r9 280x black oc edition windows 7 amd phenom x4 940 core 1180 memory 1550 last 5 results: 1098625994 809601640 292082 29 Apr 2015, 15:02:39 UTC 29 Apr 2015, 15:12:17 UTC Completed and validated 23.18 2.33 106.88 MilkyWay@Home v1.02 (opencl_amd_ati) |
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
You missed the edit window by 3 mins ;) Thx for your time, the average of those is 23.13s. I'll add your time to the AT thread now & here when I have a few more results. ********************************************************************************** Could do with some times from older hardware folks, particularly the 6900 series, but anything that'll run MW is welcomed :). Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
![]() Send message Joined: 26 Jun 09 Posts: 16 Credit: 417,572 RAC: 211 ![]() ![]() |
GPU: Nvidia GT 610 Driver: 350.12 CPU: Intel Pentium 4 560 3.6GHz OS: Windows 7 32-bit BOINC: 7.4.42 Average of last 8 work units: 1827 seconds I believe that my GT 610 is about the slowest GPU that can correctly run on this project. |
![]() Send message Joined: 22 Jan 11 Posts: 375 Credit: 64,657,871 RAC: 0 ![]() ![]() ![]() |
Interesting! But still faster than any of the cpu times posted here so far! Btw I take it your GPU is at stock clocks? Thx for your time :)(added to the AT thread, will add here after a another time added). Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit 2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7 |
![]() Send message Joined: 26 Jun 09 Posts: 16 Credit: 417,572 RAC: 211 ![]() ![]() |
Btw I take it your GPU is at stock clocks? Yes. I don't know how, or even if it is possible, to overclock it. According to the Nvidia control panel, it runs at 810 MHz. |
![]() Send message Joined: 11 Feb 11 Posts: 57 Credit: 69,475,644 RAC: 0 ![]() ![]() |
i will try later to get the absolute max out of my 280x, think i can get like 1210mhz stable with standard voltage. will post numbers soon. offtopic: anyone here know why i cant unlock voltage on a card where the package of which says, 'Unlocked Voltage'? I checked everything in afterburner i have to, entered the sentence i am fully aware,yada yada yada.. it wont unlock. card is xfx r9 280x dd black oc edition another thing: i ve tried to underclock memory as it seems to be useless for crunching mw@home. i can move the slider and change the numbers, but they wont apply for some reason? khryl |
Send message Joined: 30 Apr 14 Posts: 67 Credit: 160,674,488 RAC: 0 ![]() ![]() |
My earlier posts explained it a little. At least what I do know. I think that Volatage Overclocking is impossible now, it is locked by vendors/manufacturers for good. As for Memory underclocking, I do have identical issue. Try not to get lower than 150MHz than what Core Clock is. So with 1200MHz Core clock, you need to have Memory at about 1050MHz. With 1100MHz Core, Memory can not be set below 950MHz. |
![]() Send message Joined: 11 Feb 11 Posts: 57 Credit: 69,475,644 RAC: 0 ![]() ![]() |
ok but when the package explicitly says 'voltage unlocked' then it should actually be possible right? and for the memory; it is at 1550, so not at all lower than my core clock. it wont even change by 1mhz |
©2024 Astroinformatics Group