Updated table :-

************************************************************************************

Current GPU statistics ~ Average Run Time to Complete 1 MW v1.02 106.88 credit WU :-

HD 7970 (GPU 1200 MHz, RAM 1550 MHz) .............. 21.3s ... tictoc (Win 7)
R9 280X (GPU 1185 MHz, RAM 1600 MHz) .............. 23s ...... DutchDK
R9 280X (GPU 1125 MHz, RAM 975 MHz) ................ 23.1s ... Arivald Ha'gel
R9 280X (GPU 1100 MHz, RAM 1500 MHz) .............. 23.5s ... TennesseeTony
HD 7970 (GPU 1200 MHz, 1550 MHz) ..................... 23.7s ... tictoc (Win 10, also a different PC)
R9 280X (GPU 1100 MHz, RAM 950 MHz) ................ 24.1s ... Arivald Ha'gel
HD 7950 (GPU 1188 MHz, RAM 1250 MHz) .............. 24.1s ... GLeeM
HD 7970 GE (GPU 1000 MHz, RAM u/c 1375 MHz) .... 25s ...... DrPop
R9 280X (GPU 1070 MHz, RAM 1600 MHz) .............. 25s ...... WES
HD 7950 (GPU 1080 MHz, RAM 1250 MHz) .............. 27s ...... DR4GOON
HD 7950 (GPU 1000 MHz, RAM 1250 MHz) .............. 28.1s ... GLeeM
HD 7950 (GPU 1050 MHz, RAM 1250 MHz) .............. 29s ..... DR4GOON
HD 7950 (GPU 925 MHz, RAM 1250 MHz) ............... 31.2s ... salvorhardin
HD 7950 (GPU 900 MHz) ...................................... 33s ...... Tom*
HD 7870 XT Boost (GPU 975 MHz, RAM 1500 MHz) .. 34.1s ... kozicka
HD 7950 (stock) .................................................. 39.8s ... Rudy Toody
HD 7950 (stock) .................................................. 42.8s ... wayliff
HD 5970 (GPU 900 MHz, RAM 1200 MHz) ................ 43.7s ... superpower (dual GPU card)
HD 5870 (GPU 850 MHz, RAM u/c 600 MHz) ............ 46.2s ... swiftmallard
HD 5850 (GPU 850 MHz, RAM u/c 500 MHz) ............ 51s ..... Assimilator1
HD 5970 (GPU 735 MHz, RAM 1010) ...................... 52.6s ... superpower (dual GPU card)
HD 5850 (stock) .................................................. 60s ..... Assimilator1
HD 4850 (stock) ................................................. 121s .... TennesseeTony
GTX 980 (GPU 1417 MHz, RAM 6000 MHz) ............. 130s .... Biodoc (Linux)
HD 7850 (stock - TBC) ........................................ 139.4s . usao
HD 4830 (stock) ................................................. 161s .... TLS
GTX 970 (GPU 1114-1253 MHz) ........................... 165s .... Orange Kid
GTX 560 Ti (stock) ............................................. 252s .... zzuupp
R9 m275 (stock) ................................................ 290s .... waffleironhead
GTX 670 (stock) ................................................. 363s .... zzuupp
GTX 690 (stock) ................................................. 394s .... S@NL - JBG (dual GPU card)
GTX 750 Ti (stock) ............................................. 445s ..... TLS
GTX 260 c216 (stock) ......................................... 454s ..... Assimilator1

Current CPU statistics ~ Average CPU Time to Complete 1 MW v1.0x 106.88 credit WU :-

Intel i7-5820K (o/c 4.1 GHz) ............................... 2055s ... TennesseeTony
Intel C2Q Q9550 (o/c 3.6 GHz) ............................ 3159s ... Assimilator1
Intel Xeon X5570 (Turboing to 3.2 GHz) ............... 3376s ... DutchDK
Intel Xeon X5650 (o/c 4.1 GHz) ........................... 4130s ... DR4GOON
AMD Phenom 940 (3 GHz) .................................. 4680s ... TLS
Intel i7-4702MQ @2.2GHz, (HT on) ...................... 6245s ... Maxwell
AMD X2 4600 (2.4 GHz) ...................................... 9780s ... TLS

(links busted by this forum)

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

So are your 7850s at default clocks then? I'd like to post that time for your 7850 as it would be the 1st 1 on the list :)

Probably, since I don't know how to adjust the clocks, it's probably whatever they are set to by default.

Is there a tool/program used to see what the clocks are current set at, and to adjust them? Id be happy to install it.

OK, so Tesla K20c (ECC off, 758 MHz): 37 s

The early times on my machine were with default 705 MHz clock (~40 s)

The Radeon HD 7990 is touting 1.9 TFlops (FP64)
That's slightly better than the Titan Black.
Has anyone tried this card?

tictoc
Thx for the info :)
What are the short comings on latter 7970s? (I'm looking at buying a 2nd hand 7970 soon)

Some of the lower end 7970s and 280x's had a pretty weak power delivery system, and did not have VRM temp monitoring. This is pretty important for MilkyWay, since it pushes the VRMs harder than just about any other task you can throw at it.
I am also not a fan of the Boost Bios' or any type of throttling in the BIOS, since it can make it tough to keep the card running at full speed

@usao the 7990 is just two full Tahiti(7970/280x) dies on one PCB. If temps and throttling can be kept in check then it theoretically will perform the same as two 7970s or 280x's. In practice this is not always true, since many BOINC projects can be tough to run on a dual GPU card. I never ran my 7990 on MilkyWay, but with a no-throttle BIOS it was comparable to a pair of stock clocked 7970s in other tasks.

Thx, but which are the lower end cards? ;)

So are your 7850s at default clocks then? I'd like to post that time for your 7850 as it would be the 1st 1 on the list :)

Probably, since I don't know how to adjust the clocks, it's probably whatever they are set to by default.

Is there a tool/program used to see what the clocks are current set at, and to adjust them? Id be happy to install it.

Ref your PM, GPU clock of 1030 MHz is an overclock of 170 MHz according to its Wiki, 1200 MHz is default for the RAM.

AMD std drivers have basic overclocking & speed reading tab, go to the AMD CCC, Performance, Overdrive. Enable graphics overdrive if you want to o/c further (presumably yours is factory o/c seeing as you haven't adjusted them).
Oh also GPU-Z is a good info tool for grx cards, including many live sensor readings).

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

The 7850's were an old mining computer, which had been sitting for over a year. I just fired it up and loaded the boinc gui and it ran fine. I had forgotten how that was setup, but I found the MSI overclocking tool was loaded, which is where I got the speed details.
Down side is the box keeps going into "GPU Missing" mode, over and over again. Could be the overclocking, or could be the age. It's got lots of dust on it. It's in a back corner in my garage, so not easily accessible.

So I was just re-reading the thread, slightly confused as to how to do a CPU benchmark, is it just a simple case of disabling GPU and let a WU run only on CPU.

BTW usao I think messaged me, I did reply, but for those that want to find their list of tasks go here and then click the Tasks link.
http://milkyway.cs.rpi.edu/milkyway/home.php

So I was just re-reading the thread, slightly confused as to how to do a CPU benchmark, is it just a simple case of disabling GPU and let a WU run only on CPU.

Assuming you have at least a dual core CPU, you don't need to disable GPU crunching, but you do need to enable CPU apps in the online MW preferences (on by default IIRC).

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

I have a 4790k that I upgraded to a few months back, just wondered how to test it :) Still won't be anywhere near as fast as the GPU though!

Yea it would be cool to have a time for your CPU :).

Like I said, check in your online MW account that you have CPU work on, so 'your account' > 'preferences' > 'MW@H preferences' > 'use CPU' set to yes (if not already done).
You also want 'Run only the selected applications MilkyWay@Home: yes'
The rest as they are.

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

r9 280x @ 1180 core 1550 ram

23s

sry for the double post, cannot edit the above

amd xfx r9 280x black oc edition
windows 7
amd phenom x4 940

core 1180
memory 1550

last 5 results:

1098625994 809601640 292082 29 Apr 2015, 15:02:39 UTC 29 Apr 2015, 15:12:17 UTC Completed and validated 23.18 2.33 106.88 MilkyWay@Home v1.02 (opencl_amd_ati)
1098625996 809601642 292082 29 Apr 2015, 15:02:39 UTC 29 Apr 2015, 15:12:17 UTC Completed and validated 23.09 2.53 106.88 MilkyWay@Home v1.02 (opencl_amd_ati)
1098624771 809600792 292082 29 Apr 2015, 15:01:30 UTC 29 Apr 2015, 15:11:08 UTC Completed and validated 23.20 2.45 106.88 MilkyWay@Home v1.02 (opencl_amd_ati)
1098623840 809600029 292082 29 Apr 2015, 15:00:19 UTC 29 Apr 2015, 15:09:59 UTC Completed and validated 23.09 2.52 106.88 MilkyWay@Home v1.02 (opencl_amd_ati)
1098623841 809600030 292082 29 Apr 2015, 15:00:19 UTC 29 Apr 2015, 15:09:59 UTC Completed and validated 23.08 2.42 106.88 MilkyWay@Home v1.02 (opencl_amd_ati)

You missed the edit window by 3 mins ;)

Thx for your time, the average of those is 23.13s.
I'll add your time to the AT thread now & here when I have a few more results.

**********************************************************************************

Could do with some times from older hardware folks, particularly the 6900 series, but anything that'll run MW is welcomed :).

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

GPU: Nvidia GT 610 Driver: 350.12

CPU: Intel Pentium 4 560 3.6GHz

OS: Windows 7 32-bit

BOINC: 7.4.42

Average of last 8 work units: 1827 seconds

I believe that my GT 610 is about the slowest GPU that can correctly run on this project.

---

Interesting! But still faster than any of the cpu times posted here so far!

Btw I take it your GPU is at stock clocks?

Thx for your time :)(added to the AT thread, will add here after a another time added).

---

Team AnandTech - SETI@H, DPAD, F@H, MW@H, A@H, LHC, POGS, R@H, Einstein@H, DHEP, WCG

Main rig - Ryzen 5 3600, MSI B450 G.Pro C. AC, RTX 3060Ti 8GB, 32GB DDR4 3200, Win 10 64bit
2nd rig - i7 4930k @4.1 GHz, HD 7870 XT 3GB(DS), 16GB DDR3 1866, Win7

Btw I take it your GPU is at stock clocks?

Yes. I don't know how, or even if it is possible, to overclock it.
According to the Nvidia control panel, it runs at 810 MHz.

---

i will try later to get the absolute max out of my 280x, think i can get like 1210mhz stable with standard voltage.
will post numbers soon.

offtopic: anyone here know why i cant unlock voltage on a card where the package of which says, 'Unlocked Voltage'? I checked everything in afterburner i have to, entered the sentence i am fully aware,yada yada yada.. it wont unlock. card is xfx r9 280x dd black oc edition
another thing: i ve tried to underclock memory as it seems to be useless for crunching mw@home. i can move the slider and change the numbers, but they wont apply for some reason?

khryl

My earlier posts explained it a little. At least what I do know.
I think that Volatage Overclocking is impossible now, it is locked by vendors/manufacturers for good.
As for Memory underclocking, I do have identical issue. Try not to get lower than 150MHz than what Core Clock is.
So with 1200MHz Core clock, you need to have Memory at about 1050MHz. With 1100MHz Core, Memory can not be set below 950MHz.

ok but when the package explicitly says 'voltage unlocked' then it should actually be possible right?

and for the memory; it is at 1550, so not at all lower than my core clock. it wont even change by 1mhz