Welcome to MilkyWay@home

Nbody WU Flush

Message boards : News : Nbody WU Flush
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 8 · 9 · 10 · 11 · 12 · 13 · 14 . . . 22 · Next

AuthorMessage
Profile mikey
Avatar

Send message
Joined: 8 May 09
Posts: 3315
Credit: 519,944,632
RAC: 22,383
Message 73342 - Posted: 6 May 2022, 10:00:50 UTC - in response to Message 73341.  
Last modified: 6 May 2022, 10:06:42 UTC

The "N-Body" tasks that I have been given take from 5hrs to 15hrs to complete. This is with 16 processors on each task. Here is the thing though: On some N-Body tasks, they will hang and even say (example 10 hrs Elapsed 4270 DAYS remaining) I have noticed that when I reboot my computer this clears right up and 4270 days remaining drops to 9mins remaining.

My workaround on this matter?
I have set up TASK SCHEDULAR and have it running 8 hour reboots everyday until hell freezes over. (if you are from that small town in Michigan, then lets say until electricity ends) At this time I don't think this affects anything from getting WU done.

This is a new computer to me, I just built it, E5 2699v3 (x2) 36 core 72 thread, 128Gb ram 6TB storage, a cheap assed video card, because this ain't a gaming rig and I don't do GPU tasks.


That's a VERY NICE rig you have there!!!
The cpu's are now on sale on Ebay for US $171.40, but stores are selling them for a bit more $831.59 and that's AFTER a $200 discount!!

What motherboard did you use to put those 2 cpu's and all that memory in?
ID: 73342 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73344 - Posted: 6 May 2022, 10:17:37 UTC - in response to Message 73340.  

Well, 'caves' (aka underground cavities) can very well be gas-tight, that's where the natural gas comes from.
Good point, I guess something is holding that in. I just can't understand how a rock can do that. Aren't they permeable to gases?
ID: 73344 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73345 - Posted: 6 May 2022, 10:19:01 UTC - in response to Message 73342.  

The cpu's are now on sale on Ebay for US $171.40, but stores are selling them for a bit more $831.59 and that's AFTER a $200 discount!!
That's some difference. Some people just don't seem to know how to shop around!
ID: 73345 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Bobzilla

Send message
Joined: 27 Aug 20
Posts: 6
Credit: 39,683,314
RAC: 0
Message 73348 - Posted: 6 May 2022, 10:33:31 UTC - in response to Message 73342.  
Last modified: 6 May 2022, 10:41:38 UTC

The Motherboard is a Chinese "no name brand" BUT I have found info out on it... it's a Jingsha MB x99D4 here is the Add from Ebay. https://www.ebay.com/itm/224743230746 (side note) research has shown me to stay away from the
https://www.ebay.com/itm/115348982298?hash=item1adb55ca1a:g:kpUAAOSwB9NiXT9s (these are not made as well and are cheaper in price.)

it will come with no paperwork, no instructions, no support, (there is a warranty) but I have found out by research that the 4 jumpers in front of each NVME socket MUST be set to pins 1/2 NOT 2/3 as default.

As far as my thoughts on this board? it's inexpensive, but not cheap. it seems well made, the only design flaw I would mention are the power sockets. it has 8 pin left.... 8 pin right (too damned far for standard power cables) and 24 pin in center rear. Work around? get POWER 8 pin male/female extension cable Amazon 10.00 for a pack of 2.

Next is MB size... this is NOT an ATX this is EATX like women say... size matters. I have this in a 4U server case it doesn't mount with stand-offs. (case is ONLY atx or smaller) Work around? Rubber furniture pads from Lowes they are 3x4" rectangular comes in packs of 2. I bought 2 packs cut them in half and double stacked each pack to make 4 feet. These have strong glue on them and will instantly stick to steel mounting plate in case. Leave rubber side up so it faces bottom of motherboard and will not slip out while gripping MB firmly in place. Simple to remove just lift up and out. I am thinking of over clocking this thing... but as always more research before jumping off into the unknown. All of this built for less than 1K$
ID: 73348 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73349 - Posted: 6 May 2022, 10:44:13 UTC - in response to Message 73348.  

The Motherboard is a Chinese "no name brand" BUT I have found info out on it... it's a Jingsha MB x99D4 here is the Add from Ebay. https://www.ebay.com/itm/224743230746 (side note) research has shown me to stay away from the
https://www.ebay.com/itm/115348982298?hash=item1adb55ca1a:g:kpUAAOSwB9NiXT9s (these are not made as well and are cheaper in price.)

it will come with no paperwork, no instructions, no support, (there is a warranty) but I have found out by research that the 4 jumpers in front of each NVME socket MUST be set to pins 1/2 NOT 2/3 as default.

As far as my thoughts on this board? it's inexpensive, but not cheap. it seems well made, the only design flaw I would mention are the power sockets. it has 8 pin left.... 8 pin right (too damned far for standard power cables) and 24 pin in center rear. Work around? get POWER 8 pin male/female extension cable Amazon 10.00 for a pack of 2.

Next is MB size... this is NOT an ATX this is EATX like women say... size matters. I have this in a 4U server case it doesn't mount with stand-offs. (case is ONLY atx or smaller) Work around? Rubber furniture pads from Lowes they are 3x4" rectangular comes in packs of 2. I bought 2 packs cut them in half and double stacked each pack to make 4 feet. These have strong glue on them and will instantly stick to steel mounting plate in case. Leave rubber side up so it faces bottom of motherboard and will not slip out while gripping MB firmly in place. Simple to remove just lift up and out. I am thinking of over clocking this thing... but as always more research before jumping off into the unknown. All of this built for less than 1K$
[Large grin] Sounds like you adjust to make things work. I like that attitude.
ID: 73349 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile mikey
Avatar

Send message
Joined: 8 May 09
Posts: 3315
Credit: 519,944,632
RAC: 22,383
Message 73350 - Posted: 6 May 2022, 11:16:59 UTC - in response to Message 73344.  

Well, 'caves' (aka underground cavities) can very well be gas-tight, that's where the natural gas comes from.
Good point, I guess something is holding that in. I just can't understand how a rock can do that. Aren't they permeable to gases?


Here's another link I found on some of the things power suppliers are looking to to provide consistent power without having to build new stuff
https://hackaday.com/2022/04/06/grid-level-energy-storage-and-the-challenge-of-storing-energy-efficiently/
ID: 73350 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73351 - Posted: 6 May 2022, 12:11:34 UTC - in response to Message 73350.  
Last modified: 6 May 2022, 12:11:46 UTC

Well, 'caves' (aka underground cavities) can very well be gas-tight, that's where the natural gas comes from.
Good point, I guess something is holding that in. I just can't understand how a rock can do that. Aren't they permeable to gases?


Here's another link I found on some of the things power suppliers are looking to to provide consistent power without having to build new stuff
https://hackaday.com/2022/04/06/grid-level-energy-storage-and-the-challenge-of-storing-energy-efficiently/
Can't see anything new on there, they just mention very expensive batteries and pumped water (which I saw 30 yeas ago at the Cruachan damn in Scotland).
ID: 73351 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile HRFMguy

Send message
Joined: 12 Nov 21
Posts: 236
Credit: 575,029,129
RAC: 37,181
Message 73361 - Posted: 7 May 2022, 2:27:46 UTC

Couple o' questions for the wrinkle brained here.

1. Why have the unsent N body tasks increased by 200,000 just today?
2. Given that I see such a huge number of n body tasks available, why do I see this?

5/6/2022 6:46:07 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:46:07 PM | Milkyway@Home | No tasks sent
5/6/2022 6:46:07 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 6:47:42 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:47:42 PM | Milkyway@Home | No tasks sent
5/6/2022 6:47:42 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 6:49:21 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:49:21 PM | Milkyway@Home | No tasks sent
5/6/2022 6:49:21 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 6:50:59 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:50:59 PM | Milkyway@Home | No tasks sent
5/6/2022 6:50:59 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 6:52:37 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:52:37 PM | Milkyway@Home | No tasks sent
5/6/2022 6:52:37 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 6:55:43 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 6:55:43 PM | Milkyway@Home | No tasks sent
5/6/2022 6:55:43 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:01:45 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:01:45 PM | Milkyway@Home | No tasks sent
5/6/2022 7:01:45 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:03:24 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:03:24 PM | Milkyway@Home | No tasks sent
5/6/2022 7:03:24 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:06:44 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:06:44 PM | Milkyway@Home | No tasks sent
5/6/2022 7:06:44 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:08:17 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:08:17 PM | Milkyway@Home | No tasks sent
5/6/2022 7:08:17 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:10:40 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:10:40 PM | Milkyway@Home | No tasks sent
5/6/2022 7:10:40 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:12:18 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:12:18 PM | Milkyway@Home | No tasks sent
5/6/2022 7:12:18 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:15:43 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:15:43 PM | Milkyway@Home | No tasks sent
5/6/2022 7:15:43 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:18:59 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:18:59 PM | Milkyway@Home | No tasks sent
5/6/2022 7:18:59 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

5/6/2022 7:25:42 PM | Milkyway@Home | Scheduler request completed: got 0 new tasks
5/6/2022 7:25:42 PM | Milkyway@Home | No tasks sent
5/6/2022 7:25:42 PM | Milkyway@Home | No tasks are available for Milkyway@home N-Body Simulation

And it goes on and on.

(asking for a friend)
ID: 73361 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
kotenok2000
Avatar

Send message
Joined: 22 May 11
Posts: 66
Credit: 5,635,044
RAC: 46
Message 73363 - Posted: 7 May 2022, 11:22:35 UTC - in response to Message 73361.  

Does it still happen?
ID: 73363 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
WMD

Send message
Joined: 15 Jun 13
Posts: 15
Credit: 2,069,775,098
RAC: 49,211
Message 73364 - Posted: 7 May 2022, 14:13:39 UTC

One reason you might get that is if you don't have at least two CPUs allocated to BOINC. (I had that problem once.)
ID: 73364 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile HRFMguy

Send message
Joined: 12 Nov 21
Posts: 236
Credit: 575,029,129
RAC: 37,181
Message 73365 - Posted: 7 May 2022, 14:22:10 UTC - in response to Message 73363.  

Does it still happen?

yes
ID: 73365 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile HRFMguy

Send message
Joined: 12 Nov 21
Posts: 236
Credit: 575,029,129
RAC: 37,181
Message 73366 - Posted: 7 May 2022, 14:32:15 UTC - in response to Message 73364.  

One reason you might get that is if you don't have at least two CPUs allocated to BOINC. (I had that problem once.)

here is my app_config.xml. It's set up for 4 concurrent groups of 5 CPUs each, and is running now. One n body task finishes every 85 seconds or so, on average.

<app_config>
<app_version>
<app_name>milkyway</app_name>
<avg_ncpus>1</avg_ncpus>
</app_version>
<app_version>
<app_name>milkyway</app_name>
<plan_class>opencl_ati_101</plan_class>
<avg_ncpus>1</avg_ncpus>
<ngpus>.333</ngpus>
</app_version>
<app_version>
<app_name>milkyway</app_name>
<plan_class>opencl_nvidia_101</plan_class>
<avg_ncpus>0.866</avg_ncpus>
<ngpus>1</ngpus>
</app_version>
<app>
<name>milkyway_nbody</name>
<max_concurrent>4</max_concurrent>
</app>
<app_version>
<app_name>milkyway_nbody</app_name>
<plan_class>mt</plan_class>
<avg_ncpus>5</avg_ncpus>
</app_version>
</app_config>
ID: 73366 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Septimus

Send message
Joined: 8 Nov 11
Posts: 205
Credit: 2,882,853
RAC: 272
Message 73367 - Posted: 7 May 2022, 14:44:24 UTC - in response to Message 73366.  

Might be the processor. I have an old desktop with an Intel Yorkfield Quad that will not run Nbody at all, it does Separation quite happily 4 at a time, a bit slow but does them. Similarly a laptop with an Amd Turion processor does Separation but not Nbody.
ID: 73367 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Profile HRFMguy

Send message
Joined: 12 Nov 21
Posts: 236
Credit: 575,029,129
RAC: 37,181
Message 73368 - Posted: 7 May 2022, 15:17:14 UTC - in response to Message 73367.  

Might be the processor. I have an old desktop with an Intel Yorkfield Quad that will not run Nbody at all, it does Separation quite happily 4 at a time, a bit slow but does them. Similarly a laptop with an Amd Turion processor does Separation but not Nbody.

Probably not. It's a Ryzen 9 3900x with a modest overclock to 4250 Mhz on all cores. core voltage 1.1V
ID: 73368 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
kotenok2000
Avatar

Send message
Joined: 22 May 11
Posts: 66
Credit: 5,635,044
RAC: 46
Message 73369 - Posted: 7 May 2022, 15:22:39 UTC - in response to Message 73368.  
Last modified: 7 May 2022, 15:24:39 UTC

Ryzen 9 computer lists 72 n-body tasks and 1071 separation task as in progress.
ID: 73369 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73370 - Posted: 7 May 2022, 16:31:21 UTC - in response to Message 73367.  
Last modified: 7 May 2022, 16:32:00 UTC

Might be the processor. I have an old desktop with an Intel Yorkfield Quad that will not run Nbody at all, it does Separation quite happily 4 at a time, a bit slow but does them. Similarly a laptop with an Amd Turion processor does Separation but not Nbody.
My oldest CPU is an Intel Core 2 Quad Q8400. It's fine with Nbody. Judging by Wikipedia, the Q8400 is one of the slowest Yorkfields.

https://milkyway.cs.rpi.edu/milkyway/show_host_detail.php?hostid=923202
ID: 73370 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73371 - Posted: 7 May 2022, 16:34:05 UTC - in response to Message 73368.  

Might be the processor. I have an old desktop with an Intel Yorkfield Quad that will not run Nbody at all, it does Separation quite happily 4 at a time, a bit slow but does them. Similarly a laptop with an Amd Turion processor does Separation but not Nbody.

Probably not. It's a Ryzen 9 3900x with a modest overclock to 4250 Mhz on all cores. core voltage 1.1V
Pah! I have a Ryzen 9 3900XT. I don't overclock though, had nothing but trouble playing with that in the past. Things crash, get corrupted, all for days of fiddling and a 10% speed increase. If it was meant to go that fast reliably, they'd sell it at that speed.
ID: 73371 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Septimus

Send message
Joined: 8 Nov 11
Posts: 205
Credit: 2,882,853
RAC: 272
Message 73372 - Posted: 7 May 2022, 16:52:38 UTC - in response to Message 73370.  
Last modified: 7 May 2022, 17:04:46 UTC

Wonder why I can’t run Nbody, I have W10 . Do you allocate all cores Peter . Did you change anything in Bios at all ? Might have another try tomorrow and fiddle around ..Mine is running in 32bit…maybe that’s the issue.
ID: 73372 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Mr P Hucker
Avatar

Send message
Joined: 5 Jul 11
Posts: 990
Credit: 376,142,956
RAC: 2
Message 73373 - Posted: 7 May 2022, 17:10:30 UTC - in response to Message 73372.  
Last modified: 7 May 2022, 17:12:08 UTC

Wonder why I can’t run Nbody, I have W10 . Do you allocate all cores Peter . Did you change anything in Bios at all ? Might have another try tomorrow and fiddle around ..Mine is running in 32bit…maybe that’s the issue.
I had W10 and now W11 and neither had a problem. I didn't have to do anything in the BIOS.

I normally let it run on all cores, but I did change my 24 core machines to use 12 cores, since two 12s fit, and two 16s do not. Nbody won't go over 16.

32 bit? WTF? 32 bit Windows, BIOS, Boinc?
ID: 73373 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Septimus

Send message
Joined: 8 Nov 11
Posts: 205
Credit: 2,882,853
RAC: 272
Message 73374 - Posted: 7 May 2022, 17:24:06 UTC - in response to Message 73373.  

Presumably 32bit is the issue then ?
ID: 73374 · Rating: 0 · rate: Rate + / Rate - Report as offensive     Reply Quote
Previous · 1 . . . 8 · 9 · 10 · 11 · 12 · 13 · 14 . . . 22 · Next

Message boards : News : Nbody WU Flush

©2024 Astroinformatics Group